Implementasi Failure Mode Effect Analysis Dalam Pengendalian Kualitas Produk: Studi Literatur
DOI:
https://doi.org/10.61722/jiem.v3i2.3844Keywords:
Failure Effect Analysis, Product Quality, product controlAbstract
This research aims to identify the application of Failure Effect Analysis (FMEA) mode and analyze the integration of Failure Effect Analysis (FMEA) with other methods. The research method used in this research is qualitative with a literature review approach. The research stages begin with collecting articles, reducing articles, displaying articles, discussion, and conclusions. The research data sources are national journal articles in the last 7 years (2018 - 2024). The results showed that Failure Effect Analysis (FMEA) can be applied in various industries, not only limited to one or two industries. Failure Effect Analysis (FMEA) can be integrated with other types of methods that are in accordance with the research objectives. In the application of Failure Effect Analysis (FMEA) combined with other types of methods, there are no definite rules regarding the order in which the methods are used, this can be adjusted to the research objectives that have been formulated.
References
Absa, A. S. M., & Suseno, S. (2022). Analisis Pengendalian Kualitas Produk Eq Spacing Dengan Metode Statistic Quality Control (SQC) Dan Failure Mode And Effects Analysis (FMEA) Pada PT. Sinar Semesta. Jurnal Teknologi dan Manajemen Industri Terapan, 1(3), 183-201.
Basori, M., & Supriyadi, S. (2017, November). Analisis Pengendalian Kualitas Cetakan Packaging Dengan Metode Failure Mode and Effect Analysis (FMEA). In Prosiding Seminar Nasional Riset Terapan| SENASSET (pp. 158-163).
Dewangga, A., & Suseno, S. (2022). Analisa Pengendalian Kualitas Produksi Plywood Menggunakan Metode Seven Tools, Failure Mode And Effect Analysis (FMEA), Dan TRIZ. Jurnal Teknologi dan Manajemen Industri Terapan, 1(3), 243-253.
Hanifah, P. S. K., & Iftadi, I. (2022). Penerapan Metode Six Sigma dan Failure Mode Effect Analysis untuk Perbaikan Pengendalian Kualitas Produksi Gula. Jurnal INTECH Teknik Industri Universitas Serang Raya, 8(2), 90-98.
Kalid, S. I. (2022). Pengendalian Kualitas Cacat Produk Tas Kulit Dengan Metode Failure Mode And Effect Analysis (Fmea) Dan Fault Tree Analysis (FTA) Di Pt Mandiri Jogja Internasional. Jurnal Cakrawala Ilmiah, 1(6), 1307-1320.
Latief, R., Laga, A., & Muchtar, M. (2018). Strategi Pengendalian Mutu Proses Produksi Minuman Teh Menggunakan Metode Six Sigma (Studi Kasus Di Pt. Dharana Inti Boga). Jurnal Teknologi Pangan, 11(2), 62-69.
Mahira, M., Hadi, P., & Nastiti, H. (2021). Pengaruh kualitas produk dan kualitas pelayanan terhadap kepuasan pelanggan Indihome. Konferensi Riset Nasional Ekonomi Manajemen dan Akuntansi, 2(1), 1267-1283.
Nurkholiq, A., Saryono, O., & Setiawan, I. (2019). Analisis pengendalian kualitas (quality control) dalam meningkatkan kualitas produk. Jurnal Ekonologi Ilmu Manajemen, 6(2), 393-399.
Pusparani, M. (2021). Faktor yang mempengaruhi kinerja pegawai (suatu kajian studi literatur manajemen sumber daya manusia). Jurnal Ilmu Manajemen Terapan, 2(4), 534-543.
Susetyo, J., Yusuf, M., & Geriot, J. (2020). Pengendalian Kualitas Produk Gula Dengan Metode Statistical Processing Control (Spc) Dan Failure Mode And Efect Analysis (Fmea). Jurnal Teknologi, 13(2), 127-135
Downloads
Published
Issue
Section
License
Copyright (c) 2025 JURNAL ILMIAH EKONOMI DAN MANAJEMEN
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
