ANALISIS RISIKO KESELAMATAN KERJA PADA BAGIAN PRODUKSI DENGAN METODE JOB SAFETY ANALYSIS DAN HAZARD AND OPERABILITY STUDY

Aldora Gavrila Faiq; Ayudyah Eka Apsari

doi:10.61722/jinu.v1i4.1943

Authors

Aldora Gavrila Faiq Univeritas Teknologi Yogyakarta
Ayudyah Eka Apsari Univeritas Teknologi Yogyakarta

DOI:

https://doi.org/10.61722/jinu.v1i4.1943

Keywords:

Hazard and Operability Study, Job Safety Analysis, Occupational Safety and Health (K3), Risk.

Abstract

. CV Tunas Karya produces a variety of industrial machinery. This business may be found in Yogyakarta City's Jalan Kaliurang Dsn. Beji, Harjo Binangun, Pakem, Sleman District. The purpose of this study is to determine the risk of workplace accidents in CV. Tunas Karya's production process. The measurement of the effort taken to prevent such mishaps and the amount of risk that accidents would occur throughout the production process are the other goals. The Hazard and Operability Study Method is an engineering technique to find and reduce hazards employed in industrial processes, while the Job Safety Analysis Method seeks to examine current hazards. After using the Job Safety Analysis and Hazard and Operability Study methods to process data on occupational accident risk, the job accident risk ratio was found with a 47% moderate risk category and a 53% low risk category. To prevent the occurrence of potential hazards, the plan recommends the provision of first aid equipment located in the factory and the use of APDs that meet K3 standards.

References

Akbar. (2020). Analisis Pelaksanaan Keamanan dan Keselamatan Kerja (K3) Dengan Metode Job Safety Analysis (JSA) Proyek Pembangunan Jembatan SiKatak Universitas Diponegoro Semarang.

Anthony, M. B. (2020). Identifikasi dan Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) Pada Proses Instalasi Hydarulic System Menggunakan Metode HIRA (Hazard Identification and Risk Assesment) di PT HPP.

AS/NZS, 4360. (2004). Risk Management Guidelines. Sidney: Standards Australian/Standards New Zealand.

Bailili, S. S. (2022). Analisis Pengendalian Risiko Kecelakaan Kerja Bagian Mekanik Pada Proyek PLTU Ampan (2x3 Mw) Menggunakan Metode Job Safety Analysis (JSA).

Biantoro, A., Kholil, M., & Pranoto, H. (2019). Sistem dan Manajemen K3: Perspektif Dunia Industri dan Produktivitas Kerja. Jakarta: Mitra Wacana Media.

ILO, 2015. (2015). Interantional Labour Organization.

ISO, 31000. (2010). The Institute of Risk Management, "A Structured Approach To Enterprise Risk Management (ERM) and The Requirement of ISO 31000.

Ramadhan, H. (2022). Upaya Meminimalisasi Kecelakaan Kerja Pada Bagian Warehouse PT. Gading Murni Dengan Menggunakan Metode Hazard Identification and Risk Assesment (HIRA) dan Hazard and Operability Study (HAZOP).

Iva Mindhayani (2020 ). Analisis Risiko Keselamatan Dan Kesehatan Kerja Dengan Metode Hazop Dan Pendekatan Ergonomi (Studi Kasus: Ud. Barokah Bantul).

Irfan Rahmanto, Muhammad Ihsan Hamdy (2022). Analisa Resiko Kecelakaan Kerja Karawang Menggunakan Metode Hazard And Operability (Hazop) Di Pt Pjb Services Pltu Tembilahan.

Choirul Anwar , Willy Tambunan, Suwardana Gunawan (2019). Analisis Kesehatan Dan Keselamatan Kerja (K3) Dengan Metode Hazard And Operability Study (Hazop).

Randy Erviando, Imam Safi, Heribertus Budi S. (2020). Analisis Resiko Kesehatan Dan Keselamatan Kerja Pada Pg. Pesantren Baru Menggunakan Metode Hazop.

Andi Haslinda, Andrie, Sri Aryani, Feisar Nurhidayat (2020). Penerapan Metode Hazopuntuk Keselamatan Dan Kesehatan Kerja Pada Bagian Produksi Air Minum Dalam Kemasan Cup Pada Pt. Tirta Sukses Perkasa (Club).

Alfian Cahyo Nugroho, Sambas Sundana (2023). Analisis Potensi Bahaya Dan Mitigasi Risiko Metode Job Safety Analysis (Jsa) Di Laboratorium Kimia Pt Xyz.

Puan Arliza Azmy (2023). Studiliteraturreview:Analisis Potensi Bahaya K3 Pada Pekerja Tambang Menggunakan Job Safety Analysis (Jsa) Padakegiatan Pertambangan.

Stevana Silvia Cresna Balili1,Ferida Yuamita (2022). Analisis Pengendalian Risiko Kecelakaan Kerja Bagian Mekanik Pada Proyek Pltu Ampana (2x3 Mw) Menggunakan Metode Job Safety Analysis(Jsa).

Muhammad Dafa Pratama Rahman, Efta Dhartikasari Priyana, Akhmad Wasiur Rizqi (2022). Job Safety Analysis (Jsa) Sebagai Upaya Pengendalian Resiko Kecelakaan Kerja Pada Pekerjaan Fabrication Dd Pt. Wilmar Nabati Indonesia.

Rusli1,Isnaini Zulkarnain1,Yeyen Ekandari (2024). Risk Analysis Of Occupational Safety And Health (Osh) Using The Hazard And Operability Study (Hazop) Method For The Semani Drainage Project