ANALISIS KESELAMATAN DAN KESEHATAN KERJA (K3) MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY (HAZOP) DI PT. RODA PASIFIK MANDIRI
DOI:
https://doi.org/10.61722/jinu.v1i5.2430Abstract
PT Roda Pasifik Mandiri is a manufacturing company engaged in the bicycle manufacturing industry so that the risk of work accidents is quite high. This research discusses the analysis of Occupational Safety and Health (K3) using the Hazard And Operability Study (HAZOP) method. The purpose of this study is to identify the potential hazards of work accidents, provide a risk assessment of the hazard sources contained in the E-Bike production area of PT Roda Pasifik Mandiri and provide recommendations for improvements to hazard sources that have extreme and high risk values. Data analysis using descriptive data analysis method with HAZOP. The results showed that there are 8 potential and sources of hazards found in the E-Bike production area of PT Roda Pasifik Mandiri. Based on the risk assessment, it shows that the risk of hazard sources in the E-Bike production area of PT. Roda Pasifik Mandiri includes Extreme Risk, namely at the pointed corners of the frame, High Risk, namely in the cutter blade, gerindra machine, and worker attitude. Moderate Risk is on bicycle frames, raw material cartons piling up, impact machines and compressor dust.
References
Ada, H.J. and Hambali (2020) ‘Analisis Keselamatan dan Kesehatan Kerja dengan Metode Hazard and Operability Laboratorium di Jurusan Teknik Elektro FT-UNP yaitu Laboratorium Factory Automation ’, Jurnal Teknik Elektro dan Vokasional, 06(02), pp. 327–336.
Ardiansyah, Risnita and Jailani, M.S. (2023) ‘Teknik Pengumpulan Data Dan Instrumen Penelitian Ilmiah Pendidikan Pada Pendekatan Kualitatif dan Kuantitatif’, Jurnal IHSAN : Jurnal Pendidikan Islam, 1(2), pp. 1–9. Available at: https://doi.org/10.61104/ihsan.v1i2.57.
Asih, T.N., Mahbubah, N.A. and Fathoni, M.Z. (2021) ‘Identifikasi Bahaya Dan Penilaian Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Proses Fabrikasi Dengan Menggunakan Metode Hirarc (Studi Kasus : Pt. Ravana Jaya)’, JUSTI (Jurnal Sistem dan Teknik Industri), 1(2), p. 272. Available at: https://doi.org/10.30587/justicb.v1i2.2609.
Hakim, D.F. and Adhika, T. (2022) ‘Analisis Keselamatan dan Kesehatan Kerja (K3) dengan Menggunakan Metode Hazard and Operability (Hazop) pada Bengkel Motor’, Jurnal Syntax Admiration, 3(12), pp. 1534–1543. Available at: https://doi.org/10.46799/jsa.v3i12.519.
Namangge, S., Punuhsingon, C.S.C. and Neyland, J.S.C. (2023) ‘Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Perusahaan Bongkar Muat Menggunakan Metode Hazard And Operability Study (HAZOP)’, Jurnal Tekno Mesin, 9(2), pp. 121–130. Available at: https://ejournal.unsrat.ac.id/v3/index.php/jtmu.
Putra, A.D., Syamsuir, E. and Wahyuni, F.I. (2021) ‘Analisis Penerapan Kesehatan Dan Keselamatan Kerja (K3) Di Perusahaan Jasa Konstruksi Kota Payakumbuh’, Rang Teknik Journal, 4(1), pp. 76–82. Available at: https://doi.org/10.31869/rtj.v4i1.2034.
Riandadari, U. (2019) ‘Identifikasi Bahaya dengan Metode HIRARC dalam Upaya Memperkecil Risiko Kecelakaan Kerja di PT . PAL Indonesia’, Jurnal Teknik Mesin UNESA, 08(01), pp. 34–40. Available at: https://ejournal.unesa.ac.id/index.php/jurnal-pendidikan-teknik-mesin/article/view/27090.
Walujodjati, E. and Rahadian, S.P. (2021) ‘Analisis Manajemen Risiko K3 Pekerjaan Jalan Tol Cisumdawu Phase III’, Jurnal Konstruksi, 19(1), pp. 60–69. Available at: https://doi.org/10.33364/konstruksi/v.19-1.874.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 JURNAL ILMIAH NUSANTARA
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
