Identifikasi dan Pengendalian Risiko Keselamatan Kerja pada Pengoperasian Mesin Rotogravure Menggunakan Metode HIRARC dan FTA
DOI:
https://doi.org/10.61722/jirs.v3i2.11903Keywords:
HIRARC, Fault Tree Analysis, occupational safety, risk control, rotogravure machine.Abstract
The operation of rotogravure machines involves various hazards that may increase the risk of occupational accidents if not properly controlled. This study aims to identify potential hazards, assess occupational risk levels, and propose risk control measures for rotogravure machine operations at PT IGP Internasional Sleman using the Hazard Identification, Risk Assessment, and Risk Control (HIRARC) and Fault Tree Analysis (FTA) methods. A descriptive research approach was employed, with data collected through observation, interviews, and documentation. The results indicate that hazards were identified during roller setting, printing, dryer operation, and machine cleaning activities. Based on the HIRARC assessment, roller setting was classified as High Risk, while printing and dryer operations were categorized as Moderate Risk, and machine cleaning as Low Risk. FTA revealed that occupational accidents were primarily influenced by human factors, machine conditions, work methods, and inadequate implementation of safety practices. The recommended control measures include improving compliance with standard operating procedures, consistent use of personal protective equipment, regular occupational safety training, workplace supervision, and routine machine maintenance.
References
Daulay, R. F., & Nuruddin, M. (2022). Analisis K3 di Bengkel Dwi Jaya Motor dengan menggunakan metode HIRA terintegrasi metode FTA. JUSTI (Jurnal Sistem dan Teknik Industri), 2(4), 571–579. https://doi.org/10.3 0587/justicb.v2i4.4246
Sufa, M. S., & Astuti, T. R. (2024). Work accident risk analysis using HIRARC and FTA methods (case study: Suwarno Meubel). E3S Web of Conferences, 517. https://doi.org/10.1051/e3sconf/202451715009
Habibi, M., Pohan, I. F., Azhar Ali Wibowo, M., & Fauzan, A. T. (2025). Analisa potensi bahaya dan risiko kegiatan bongkar muat peti kemas dengan metode HIRARC (studi kasus: PT. ABC). Integrative Perspectives of Social and Science Journal, 2(3), 4821–4833. https://doi.org/10.61132/ipssj.v2i3.644
Hardiansah, H., Sukmono, Y., & Saptaningtyas, W. W. (2023). Analisis risiko kecelakaan kerja dengan metode Failure Mode and Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) (studi kasus: Bengkel Dinamis). Jurnal Teknik Industri (JATRI), 1(1), 1–9. https://doi.org/10.30872/jatri.v1i1.493
Ningsih, W., Assyifa, Pramudita, M. A., & Budiharjo. (2025). Analisis risiko keselamatan dan kesehatan kerja pada Pabrik Tahu Pak Abdullah dengan menggunakan metode HIRADC. Hikamatzu Journal of Multidisciplinary, 2(1). https://doi.org/10.70235/hjm.v2i1.206
Panday, R., & Rachmat, B. (2020). Hazard identification, risk assessment and risk control in chemical industry. International Journal of Recent Technology and Engineering (IJRTE), 8(6), 4429–4433. https://doi.org/10.35940/ijrte.F9229.038620
Syarif, A. A., Harahap, U. N., Sinaga, S. J., & Siregar, M. Z. (2023). Analisis sistem kesehatan dan keselamatan kerja di PT Sumber Sawit Makmur dengan metode Hazard Identification Risk Assessment and Risk Control (HIRARC) dan Fault Tree Analysis (FTA). Jurnal Al Ulum LPPM Universitas Al Washliyah Medan, 11(1), 7–15. https://doi.org/10.47662/alulum.v11i1.432
Burliyan, I., Lestani, M. E., & Purnomo, A. (2025). Operational risk control strategies in fuel distribution using HIRARC and FTA. Eduvest - Journal of Universal Studies, 5(9), 10610–10622. https://doi.org/10.59188/eduvest.v5i9.51103
Raharja, M. A., & Nusyirwan, D. (2023). Identifikasi penerapan sistem manajemen K3 menggunakan metode Fault Tree Analysis. Jurnal Sustainable: Jurnal Hasil Penelitian dan Industri Terapan, 12(1). https://doi.org/10.31629/sustainable.v12i1.5630
Riswanto, I., & Nugroho, J. A. (2024). Analisis keselamatan kerja pada CV Gemilang Kencana menggunakan metode Hazard Identification, Risk Assessment dan Fault Tree Analysis. 2(8).
Darmawan, D., Puspita, A. D., & Santosa, G. (2022). Analisis keselamatan dan kesehatan kerja dengan pendekatan Hazard Identification Risk Assessment and Fault Tree Analysis pada PT. WGI. JISO: Journal of Industrial and Systems Optimization, 5(1), 10–17. https://doi.org/10.51804/jiso.v5i1.10-17
Azzahra, F., Enny, P. N., & Ratisan, D. J. (2022). Analisis risiko kerja menggunakan Job Safety Analysis (JSA) dengan pendekatan Hazard Identification, Risk Assessment and Risk Control (HIRARC) di PT Indo Java Rubber Planting Co. Jurnal Agrifoodtech, 1(1). https://jurnal2.untagsmg.ac.id/index.php/agrifoodtech
Fikri, A. M., Mahbubah, N. A., & Negoro, Y. P. (2022). Pengelolaan risiko kecelakaan kerja di open area konstruksi berbasis pendekatan HIRARC. Jurnal Surya Teknika, 9(2), 441–449. https://doi.org/10.37859/jst.v9i2.4263
Darmawan, D., Puspita, A. D., & Santosa, G. (2022). Analisis keselamatan dan kesehatan kerja dengan pendekatan Hazard Identification, Risk Assessment and Fault Tree Analysis pada PT WGI. JISO: Journal of Industrial and Systems Optimization, 5(1), 10–17. https://doi.org/10.51804/jiso.v5i1.10-17
Hidayat, A. A. (2020). Analisis program keselamatan kerja dalam usaha meningkatkan produktivitas kerja dengan pendekatan HIRARC dan FTA (studi kasus: PT Mitra Karsa Utama). Scientific Journal of Industrial Engineering, 1(2), 1–6. https://doi.org/10.30998/sijie.v1i2.86
Priyanka, V., & Basaria, F. T. (2023). Minimizing work risks in Indonesia: A case study analysis of hazard identification, risk assessment, and risk control implementation. E3S Web of Conferences, 426. https://doi.org/10.1051/e3sconf/202342601017
Tasidalle, F. N. F., Subekti, A., & Rizal, M. C. (2024). Analisis penilaian risiko proses assembly tube bundle heat exchanger dengan metode HIRADC dan FTA. Journal of Safety, Health, and Environmental Engineering, 1(1), 56–63. https://doi.org/10.35991/jshee.v1i1.18
Andriani, D., Ratnaningsih, A., & Putra, P. (2022). Analisis HIRARC risiko K3 fabrikasi dan erection gedung baja pembangunan Hotel Loji Kridanggo Boyolali. Jurnal Teknik Sipil, 8(2), 70–81. https://doi.org/10.26760/rekaracana
Fitrialita, A. (2021). Analisis risiko kecelakaan kerja pada pekerja ketinggian dengan metode HIRARC di proyek MTH 27 Office Suite PT X tahun 2021. Dohara Publisher Open Access Journal, 1(4). http://dohara.or.id/index.php/hsk
Hanapi, N. M., Latif, N. H. A., Zaki, J. A., & Kamal, M. M. M. (2024). Integrating HIRARC and Fault Tree Analysis (FTA) for Comprehensive Work Health and Safety Assessment in a Wood Industry Workshop. Semarak International Journal of Public Health and Primary Care, 1(1), 1–15. https://doi.org/10.37934/sijphpc.1.1.115
Parawansyah, P. C., Widaningrum, S., & Salma, A. S. (2024). Analisis Risiko Keselamatan Kerja Pada Tahap Persiapan Pembuatan Pressure Vessel Memakai Metode HIRARC (Hazard Identification, Risk Assessment and Risk Control) dan FTA (Fault Tree Analysis) (Studi Masalah: PT. XYZ). e-Proceeding of Engineering, 11(3), 2207–2216.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 JURNAL ILMIAH RESEARCH STUDENT
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
