ANALISIS PENGENDALIAN KUALITAS PRODUKSI DI PT ABC DENGAN METODE SIX SIGMA DALAM UPAYA MENGURANGI TINGKAT KECACATAN PRODUK

Authors

  • Putri Handayani Universitas Teknologi Yogyakarta
  • Gloria Angelica Universitas Teknologi Yogyakarta
  • Gesang Adil Wijaksono Universitas Teknologi Yogyakarta
  • Singgih Rifqysae Universitas Teknologi Yogyakarta
  • Daffa Rosyad Universitas Teknologi Yogyakarta

DOI:

https://doi.org/10.61722/jirs.v3i1.8723

Keywords:

Quality control, DMAIC, Standard Operating Procedures, Pulp, Product defects

Abstract

 PT ABC is a pulp and paper manufacturing company that faces quality control issues in the Pulp Making 2 Unit, as indicated by the presence of defective pulp products. Based on production data from January 2024 to June 2025, out of a total production of 362,842 ADt, 16,074 ADt (4.43%) were identified as defects, including discoloration, sandy pulp, and knot-contaminated pulp. This study aims to analyze pulp quality control and identify the factors causing defects using the DMAIC approach. The results show that discoloration is the most dominant defect, followed by sandy pulp and knot contamination, with the main causes related to human, machine, material, method, and environmental factors. The consistent implementation of quality control SOPs is expected to reduce defect rates and improve pulp quality

References

Azis, D., & Vikaliana, R. (2023). Pengendalian Kualitas Produk Menggunakan Pendekatan Six Sigma Dan Kaizen Sebagai Usaha Pengurangan Kecacatan Produk. Jurnal Intent: Jurnal Industri Dan Teknologi Terpadu, 6(1), 37-53.

Maulana, B. (2022). Pengendalian Kualitas Pengolahan Kulit Uptd Kota Padang Panjang Menggunakan Metode Six-Sigma. Jurnal Teknologi Dan Sistem Informasi Bisnis.

Suseno, S., & Hermansyah, R. A. (2023). Analisis Pengendalian Kualitas Produk Gula Menggunakan Metode Six Sigma pada PT Madu Baru. SENTRI: Jurnal Riset Ilmiah, 2(2), 489-504.

Imam, S., Nahdah, N., & Yamin, I. Analisis Pengendalian Kualitas Produk X Menggunakan Lean Six Sigma. Jurnal Teknik Industri, 2(2), 104-112.

Krisnanda, W. A., & Pulansari, F. (2023). Analisa Pengendalian Kualitas Produk Cacat pada T–Valve Menggunakan Metode Lean Six Sigma (DMAIC). JUMINTEN, 4(1), 13-24.

MOHAMMAD, F. N. M., & WIDYA, S. (2024). Upaya Perbaikan Kualitas Produk Dengan Metode Six Sigma dan FMEA di PT Yogya Presisi Tehnikatama Industri. JURNAL ILMIAH TEKNIK INDUSTRI DAN INOVASI Учредители: CV. Alim's Publishing, 2(4), 1-16.

Sirine, H., & Kurniawati, E. P. (2017). Pengendalian kualitas menggunakan metode six sigma (Studi kasus pada PT Diras Concept Sukoharjo). AJIE (Asian Journal of Innovation and Entrepreneurship), 2(03), 254-290.

Widodo, A., & Soediantono, D. (2022). Benefits of the six sigma method (dmaic) and implementation suggestion in the defense industry: A literature review. International Journal of Social and Management Studies, 3(3), 1-12.

Downloads

Published

2026-01-27

Issue

Vol. 3 No. 1 (2026): Maret

Section

Articles

License

Copyright (c) 2025 JURNAL ILMIAH RESEARCH STUDENT

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.