ANALISIS PENGENDALIAN KUALITAS PRODUK CACAT MENGGUNAKAN METODE FMEA (FAILURE MODE AND EFFECT ANALYSIS)
DOI:
https://doi.org/10.61722/jmia.v3i1.8158Keywords:
FMEA; Gloves; Product Defects; Quality ControlAbstract
PT Jogja Glove Indonesia is a company engaged in the production of sportswear, particularly gloves. During the period from January 6, 2025 to February 14, 2025, the total production of Kiprun brand gloves reached 23,725 units, with 6,231 units failing to meet quality standards, accounting for 3.8% of total production. To address this issue, the Failure Mode and Effect Analysis (FMEA) method was applied to identify potential failures, their causes and impacts, and to determine improvement priorities based on the Risk Priority Number (RPN). The results showed three main types of defects: torn gloves with the highest percentage at 82.52%, non-oval shape defects at 9.16%, and folded defects at 8.31%. These defects were caused by several factors, including human, machine, material, method, and environmental factors. Based on the analysis, improvement proposals include routine machine maintenance, improved lighting in the production area, and enhanced supervision and guidance for operators.
References
Amrutha, H., Ajinkya, J. & Surabhi, M. (2021). Application of failure modes and effects analysis (FMEA) in automated spot welding process of an automobile industry: A case study. Journal of Engineering Education Transformations, 34(Special Issue), 281–289. https://doi.org/10.16920/jeet/2021/v34i0/157156
Anastasya, A. & Yuamita, F. (2022). Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) di PDAM Tirta Sembada. Jurnal Teknologi dan Manajemen Industri Terapan, 1(I), 15–21. https://doi.org/10.55826/tmit.v1ii.4
Cahyono, A., Ayu Titisari, M. & PGRI Adi Buana Surabaya, U. (2023). Jurnal Scientia is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0) Application Of The Fmea Method In Determining Improvement Priorities In The Product Quality System At Company X. Jurnal Scientia, 12(2), 2023. https://seaninstitute.org/infor/index.php/pendidikan/article/view/1329
Haryono, M. F. Y. & Sumiati. (2023). Analisis Pengendalian Kualitas Produk Paving Block Menggunakan Metode Statistical Quality Control (SQC) Dan Failure Mode Effect Analysis (FMEA) Di PT. Duta Beton Mandiri, Pasuruan. Jurnal Penelitian Rumpun Ilmu Teknik, 2(3), 45–65. https://doi.org/10.55606/juprit.v2i3.1992
Jayarullah & Hartati, R. (2023). Riplle Mill Machine Failure Analysis Using the FMEA (Failure Mode and Effect Analysis) Method at PT. Ujong Neubok In. Jurnal Inotera, 8(1), 92–98. https://doi.org/10.31572/inotera.vol8.iss1.2023.id219
Lisna, R. M., Priyana, E. D. & Hidayat, H. (2023). Analysis of Quality Control Using the FMEA (Failure Mode and Effect Analysis) Method in the Welding Process in the Feed Drum Project. Jurnal Sains dan Teknologi Industri, 20(2), 588. https://doi.org/10.24014/sitekin.v20i2.21731
Margareta, M., & Hamid, A. (2021). Analisa Pengaruh Peningkatan Kuantitas Produk Cacat Pada Perusahaan Manufaktur (Studi Kasus Pt.X). Jurnal Revenue : Jurnal Ilmiah Akuntansi, 2(1), 199–204. https://doi.org/10.46306/rev.v2i1.63
Musif, F., Rizqi, A. W. & Ismiyah, E. (2023). Analysis of the Causes of Defects in the Production Process of Pillowcases and Bolsters Using the Fmea Method Approach At Ud Arjuno. Jurnal Scientia, 12(03), 3280–3288. https://doi.org/10.58471/scientia.v12i03.1692
Nazia, S., Safrizal. & Fuad, M. (2023). Peranan Statistical Quality Control (Sqc) Dalam Pengendalian Kualitas: Studi Literatur. Jurnal Mahasiswa Akuntansi Samudra, 4(3), 125–138. https://doi.org/10.33059/jmas.v4i3.8079
Oktaviana, A. C. & Auliandri, T. A. (2023). Analisis Pengendalian Kualitas Produksi Meja Dan Kursi Menggunakan Diagram Pareto Dan Fishbone Pada PK. SKM JATI. INOBIS: Jurnal Inovasi Bisnis dan Manajemen Indonesia, 6(4), 559–572. https://doi.org/10.31842/jurnalinobis.v6i4.310
Pangestuti, D. C., Nastiti, H. & Husniaty, R. (2022). Analisis Risiko Operasional Dengan Metode FMEA. Jurnal Akuntansi, Ekonomi Dan Manajemen Bisnis, 10(2), 177–186. https://doi.org/10.30871/jaemb.v10i2.3235
Pratama, A. W. & Rochmoeljati, R. (2022). Pengendalian Kualitas Produk Kendang Jimbe dengan Menggunakan Statistical Quality Control (SQC) dan Failure Mode Effect Analysis (FMEA) pada UD. Budi Luhur. Juminten, 3(2), 109–120. https://doi.org/10.33005/juminten.v3i2.407
Rauf, A. R., Ali, S., & Supardi, J. (2022). Screw Press Machine Damage Analysis with Failure Mode and Effect Analysis (FMEA) Method in Palm Oil Factory PT. Socfindo Seunagan. Jurnal Inotera, 7(1), 12–18. https://doi.org/10.31572/inotera.vol7.iss1.2022.id165
Rahman, A. & Perdana, S. (2021). Analisis Perbaikan Kualitas Produk Carton Box di PT XYZ Dengan Metode DMAIC dan FMEA. Jurnal Optimasi Teknik Industri (JOTI), 3(1). https://doi.org/10.30998/joti.v3i1.9287
Rochmoeljati R. & Moch, H. M. (2020). Perbaikan Kualitas Produk Roti Tawar Gandeng Dengan Metode Fault Tree Analysis (Fta) Dan FMEA (Failure Mode and Effect Analysis) Di Pt. Xxz. Juminten: Jurnal Manajemen Industri dan Teknologi, 01(04), 70–80.
Saputra, R. & Santoso, D. T. (2021). Analisis Kegagalan Proses Produksi Plastik Pada Mesin Cutting Di Pt. Fkp Dengan Pendekatan Failure Mode and Effect Analysis Dan Diagram Pareto. Barometer, 6(1), 322–327. https://doi.org/10.35261/barometer.v6i1.4516
Sumarya, E. (2021). Pengendalian Kualitas Produk Pada Proses Produksi Air Minum Dalam Kemasan Botol 600 Ml Dengan Metode Failure Mode Efect Analysis (Fmea) Di Pt. Lmn Batam. PROFISIENSI: Jurnal Program Studi Teknik Industri, 9(1), 178–187. https://doi.org/10.33373/profis.v9i1.3388
Sumasto, F., Christiani, J., Wulansari, I., Rozi, M. F., Dzulfikar, A., & Ismono, A. (2023). Application of Failure Mode and Effect Analysis (FMEA) for Defect Reduction: A Case Study on Scratch Defects in Oil Separator Parts in Machining Line. IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(3), 632. https://doi.org/10.22441/ijiem.v4i3.22768
Supoyo, F. R. & Darajatun, R. A. (2023). Analisis Pengendalian Kualitas Untuk Mengurangi Defect Parking Brake dengan Metode FMEA di PT XYZ. Jurnal Serambi Engineering, 8(1), 4438–4444.
Zendrato, R. V., Ryantama, R., Nugroho, M. A., Putri, D., Kuncoro, D. & Parningotan, S. (2022). Analisis Pengendalian Kualitas Pada Tempe Menggunakan Metode Seven Tools. IMTechno: Journal of Industrial Management and Technology, 3(2), 99–109. https://doi.org/10.31294/imtechno.v3i2.1221
Downloads
Published
Issue
Section
License
Copyright (c) 2025 JURNAL MULTIDISIPLIN ILMU AKADEMIK
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
