Perencanaan Ulang Tata Letak Fasilitas Menggunakan Metode Activity Relationship Chart (ARC) Pada Taufiq Mart Kabupaten Solok Selatan Sumatera Barat

Authors

  • Diva Nurfitrianti Azizah Diva Nurfitrianti Azizah
  • Yunus Al Gaza Institut Pertanian Bogor
  • Riza Muharmayenti Institut Pertanian Bogor
  • Zulhan Andika Institut Pertanian Bogor

DOI:

https://doi.org/10.61722/jrme.v1i2.1474

Keywords:

ARC; Market; Retail; Layout; TCR

Abstract

Taufiq Mart is a supermarket that offers various types of goods including household necessities, stationery, frozen food and fruit. Even though it is popular among consumers, Taufiq Mart has problems with less than optimal store layout, such as there are still many empty rooms so it needs to reorganize the Taufiq Mart facilities which are not yet optimal. To overcome this problem, it is necessary to redesign the store layout using analytical methods such as the Activity Relationship Chart (ARC), with data from various sources. The analysis results show that the freezer section is the main priority in remaking the layout because it has the highest TCR value. It is hoped that the new layout changes will increase operational efficiency and consumer comfort at Taufiq Mart.

References

Yulistio, A., Basuki, M., & Azhari, A. (2022). PERANCANGAN ULANG TATA LETAK DISPLAY RETAIL FASHION MENGGUNAKAN ACTIVITY RELATIONSHIP CHART (ARC). Jurnal Ilmiah Teknik Industri, 10(1), 21–30. https://doi.org/10.24912/jitiuntar.v10i1.9388

Maria, S., Ubas, N., Bayu, A., & Pradana, I. (2021). ANALISIS TATA LETAK METODE ACTIVITY RELATIONSHIP CHART (ARC) PADA KANTOR GUDANG PT. BHANDA GHARA REKSA, CABANG DENPASAR.

Susanto, F. E., & Rusindayanto. (2021). Analysis of Factory Facility Layout Design Using the Craft Algorithm Method At Pt. Focus on Ciptamakmur Bersama, Blitar. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 3(2), 1–13. https://doi.org/10.21070/prozima.v3i2.1267

Adiasa, I., Suarantalla, R., Rafi, M. S., & Hermanto, K. (2020). Perancangan Ulang Tata Letak Fasilitas Pabrik Di CV. Apindo Brother Sukses Menggunakan Metode Systematic Layout Planning (SLP). Performa: Media Ilmiah Teknik Industri, 19(2). https://doi.org/10.20961/performa.19.2.43467.

Pristianingrum, N., Akuntansi, M. M., Ekonomi, F., Bisnis, D., & Jember, U. (2017). Peningkatan Efisiensi Dan Produktivitas Perusahaan Manufaktur Dengan Sistem Just In Time (Vol. 1, Issue 1).

Safitri1, N. D., Ilmi2, Z., & Kadafi, M. A. (2017). Analisis perancangan tataletak fasilitas produksi menggunakan metode activity relationship chart (ARC). 9(1), 38–47

Purwadisastra, D. (2021). STRATEGI RITEL KONVENSIONAL MODERN DALAM MENGHADAPI PERSAINGAN PADA MASA PANDEMI COVID 19 Oleh. Jurnal Ekonomi Dan Bisnis, 8(1).

Putra, Y. P. (2019). MERANCANG TATA LETAK FASILITAS PABRIK DENGAN METODE ALGORITMA CORELAP DI CV. ROBBANI SINGOSARI.

Hasil, J., Dan, P., Ilmiah, K., Rachman, A., Widyaningrum, D., & Rizqi, A. W. (2023). Perancangan Tata Letak Fasilitas Untuk Meminimalkan Jarak Material Handling Pada Pabrik Pupuk Organik PT. Petrokopindo Cipta Selaras Dengan Metode ARC Dan ARD. In Jurnal Teknik Industri (Vol. 9, Issue 1).

Rozak, A., Kristanto, A. D., Raharjo, G. S., & Saleh, N. A. (2021). Penerapan ARC dan ARD untuk Membuat Rancangan Layout Fasilitas pada Pabrik Kerupuk Menggunakan BLOCPLAN Di CV Arto Moro.

Downloads

Published

2024-05-27

Issue

Vol. 1 No. 2 (2024): Mei

Section

Articles

License

Copyright (c) 2024 JURNAL RUMPUN MANAJEMEN DAN EKONOMI

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.