ANALISIS KINERJA PROSES PRODUKSI PLASTIK ROLL POLYPROPYLENE MENGGUNAKAN METODE SIX SIGMA PADA PT KUSUMA MULIA PLASINDO INFITEX
DOI:
https://doi.org/10.61722/jssr.v4i3.10619Keywords:
Quality Control, Six Sigma, DMAIC, Polypropylene Plastic Roll, Defective Products.Abstract
In the production process of polypropylene (PP) plastic, defective products were found in the form of stubble and wrinkle with a percentage of 1.50% and 1.12% wrinkle defect. Six Sigma was employed as the analytical method in this study, utilizing DMAIC framework (Define, Measure, Analyze, Improve, and Control). This research was designed to determine sigma level, examine factors responsible for product defects, and propose corrective actions aimed at reducing defective outputs. The analysis produced a sigma value of 3.74, where defects were found to originate from three main sources: machinery issues caused by damaged heating components, human-related errors due to insufficient accuracy and lack of supervision during production, and environmental conditions such as dust and elevated production room temperatures that influence workers’ psychological state.
References
Earlecia, Agung Saryatmo, M. And Wayan Sukania, I. 2023. Six Sigma Method For Improving The Quality Of A Flat Lm Type. An Evidence-Based Case Study Of A Pt. Spm. International Journal Of Application On Sciences, Technology And Engineering 1(1), Pp. 350–360. Doi: 10.24912/Ijaste.V1.I1.350-360.
Fachrudin, F. And Al-Faritsy, A.Z. 2024. Analisis Pengendalian Kualitas Untuk Menurunkan Jumlah Cacat Benang Cotton Dengan Metode Six Sigma (Dmaic). Jurnal Ilmiah Sains Teknologi Dan Informasi 3(1), Pp. 31–44. Doi: 10.59024/Jiti.V3i1.995.
Fitria, L., Tauhida, D. And Sokhibi, A. 2023. Quality Control With Six Sigma Method To Minimize Polyester Fabric Product Defects At Pt Sukuntex. Opsi 16(1), P. 110. Doi: 10.31315/Opsi.V16i1.6786.
Gustyanto, N.F. And Eka Apsari, A. 2024. Analisis Pengendalian Kualitas Produk Dalam Upaya Mengurangi Jumlah Kerusakan Produk Dengan Menggunakan Metode Six Sigma Dan Kaizen (Studi Kasus Pabrik Roti Bakar Azhari). Jurnal Ilmiah Sains Teknologi Dan Informasi 2(3), Pp. 45–56. Doi: 10.59024/Jiti.V2i3.801.
Huseinsyah, M.R., Grenny Sudarmawan, R., Ifa Saidatuningtyas, Dan, Studi Teknologi Rekayasa Manufaktur, P., Teknik Mesin, J., Negeri Jakarta, P. And A Siwabessy, J.G. 2024. Pengendalian Kualitas Defect Burry Pada Produk Disc Brake Dalam Proses Blanking Menggunakan Metode Six Sigma Di Pt X. Available At: Http://Prosiding.Pnj.Ac.Id.
Irwanto, A., Arifin, D. And Arifin, M.M. 2018. Peningkatan Kualitas Produk Gearbox Dengan Pendekatan Dmaic Six Sigma Pada Pt. X, Y, Z.
Islamia, R. And Asy’ari, S. 2023. Usulan Penerapan Six Sigma Dmaic Pada Produk Batu Split (Studi Kasus Pt.Mbp). Xxiv(1), Pp. 63–72. Available At: Http://Www.Journal.Umg.Ac.Id/Index.Php/Matriks.
Jamal, T., Satta, A., Ismail, S., As’arry, A., Sapuan, S.M. And Tarique, J. 2023. Improvement Of Plastic Manufacturing Processes By Six Sigma And Dmaic Methods. Applied Science And Engineering Progress 16(3), P. 6838. Available At: Https://Www.Researchgate.Net/Publication/370688769.
Jaya, I.R. Et Al. 2025. Penerapan Metode Six Sigma Dmaic Dengan Pendekatan Failure Mode And Effect Analysis Pada Produk Roti Alfitra Bakerry (Application Of The Six Sigma Method With The Failure Mode And Effect Analysis Approach On Alfitra Bakery Products).
Juwito, A. And Al-Faritsy, A.Z. 2022. Analisis Pengendalian Kualitas Untuk Mengurangi Cacat Produk Dengan Metode Six Sigma Di Umkm Makmur Santosa. Available At: Http://Bajangjournal.Com/Index.Php/Jci.
Khalisan, D. And Hasibuan, A. 2025. Penggunaan Metode Six Sigma Dalam Meningkatkan Kualitas Produk Use Of The Six Sigma Method In Improving Product Quality. Variable Research Journal 02, P. 1.
Lestari, S. And Junaidy, M.H. 2020. Pengendalian Kualitas Produk Compound At-807 Di Plant Mixing Center Dengan Metode Six Sigma Pada Perusahaan Ban Di Jawa Barat. Universitas Muhammadiyah Tangerang 9(1).
Liu, Q., Hu, M., Yang, F., Li, Y. And Yang, F. 2023. Application Of A Six Sigma Model To Evaluate The Analytical Performance Of Cerebrospinal Fluid Biochemical Analytes And The Design Of Quality Control Strategies For These Assays: A Single-Centre Study. Clinical Biochemistry 114, Pp. 73–78. Doi: 10.1016/J.Clinbiochem.2023.02.005.
Mayusda, I. 2023. Quality Improvement Of Tin Ingot Product Using Six Sigma Method At Pt Timah Tbk. Opsi 16(1), P. 121. Doi: 10.31315/Opsi.V16i1.7434.
Mittal, A., Gupta, P., Kumar, V., Al Owad, A., Mahlawat, S. And Singh, S. 2023. The Performance Improvement Analysis Using Six Sigma Dmaic Methodology: A Case Study On Indian Manufacturing Company. Heliyon 9(3). Doi: 10.1016/J.Heliyon.2023.E14625.
Nasution, D.R., Hasibuan, A. And Sibuea, S.R. 2023. Pengendalian Kualitas Cpo Untuk Meminimumkan Alb Menggunakan Metode Dmaic. Blend Sains Jurnal Teknik 1(4), Pp. 333–342. Doi: 10.56211/Blendsains.V1i4.190.
Oktaviani, R., Rachman, H., Rifky Zulfikar, M. And Fauzi, M. 2022. Pengendalian Kualitas Produk Sachet Minuman Serbuk Menggunakan Metode Six Sigma Dmaic. Jurnal Ilmiah Teknik Dan Manajemen Industri 2(1), Pp. 2022–122. Doi: 10.46306/Tgc.V2i1.
Rauf, N., Padhil, A., Alisyahbana, T., Saleh, A. And Dahlan, M. 2022. Analysis Of Quality Control Of T-Shirt Screen Printing Products With Six Sigma Dmaic Method On Cv. Macca Clothing. Journal Of Industrial Engineering Management 7(1), Pp. 76–82. Doi: 10.33536/Jiem.V7i1.1147.
Sajjad, M.H., Naeem, K., Zubair, M., Usman Jan, Q.M., Khattak, S.B., Omair, M. And Nawaz, R. 2021. Waste Reduction Of Polypropylene Bag Manufacturing Process Using Six Sigma Dmaic Approach: A Case Study. Cogent Engineering 8(1). Doi: 10.1080/23311916.2021.1896419.
Simiele, E. Et Al. 2023. Mitigation Of Intensity Modulated Radiation Therapy And Stereotactic Body Radiation Therapy Treatment Planning Errors On The Novel Reflexion X1 System Using Failure Mode And Effect Analysis Within Six Sigma Framework. Advances In Radiation Oncology 8(5). Doi: 10.1016/J.Adro.2023.101186.
Sithole, C., Gibson, I. And Hoekstra, S. 2021. Evaluation Of The Applicability Of Design For Six Sigma To Metal Additive Manufacturing Technology. In: Procedia Cirp. Elsevier B.V., Pp. 798–803. Doi: 10.1016/J.Procir.2021.05.041.
Zulkhulaifah, J.A. And Apriliani, F. 2024. Penerapan Six Sigma Dan Metode Define, Measure, Analyze, Improve, Control (Dmaic) Untuk Analisis Green Tyre Shortage Di Pt Merpati Putih. Factory Jurnal Industri, Manajemen Dan Rekayasa Sistem Industri 2(3), Pp. 119–133. Doi: 10.56211/Factory.V2i3.495.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 JOURNAL SAINS STUDENT RESEARCH
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
