Evaluasi Resiko Keselamatan Kerja Pada Area Produksi Menggunakan Metode Hirarc di PT. Mitrametal Perkasa
DOI:
https://doi.org/10.61722/jssr.v4i3.10710Keywords:
HIRARC, Occupational Safety and Health, Occupational Risk, Production AreaAbstract
Occupational safety and health (OSH) is an important aspect of manufacturing activities because it is directly related to worker safety and the continuity of production processes. PT Mitrametal Perkasa, as an automotive component manufacturing company, has various work activities in the production area that potentially cause occupational accident risks, particularly in the Machining Department. Therefore, a systematic evaluation of occupational safety risks is required. This study aims to identify potential hazards, assess risk levels, and formulate occupational safety risk control measures in the production area of PT Mitrametal Perkasa. The method used in this study is HIRARC (Hazard Identification, Risk Assessment, and Risk Control). Data collection was carried out through direct observation, interviews with operators and production supervisors, and documentation studies. Risk assessment was conducted based on the likelihood and severity levels of hazards in each work activity. The results show that there are potential hazards with moderate to high risk levels, especially in CNC machine operation, handling of sharp materials, and clamping systems. Recommended control measures include the implementation of engineering controls, enforcement of work procedures, improvement of OSH training, and consistent use of personal protective equipment.
References
(ILO), I. L. O. (2021). Safety and Health at the Heart of the Future of Work: Building on 100 Years of Experience. ILO.
(OSHA), O. S. and H. A. (2020). Occupational Safety and Health Standards. U.S. Department of Labor. https://www.osha.gov
Azhar, A., & Wijaya, R. (2021). Analisis Risiko Pengelasan Industri Logam Menggunakan Metode HIRARC. Jurnal Keselamatan Kerja, 9(2), 45–53.
Azizah, R., Susanto, D., & Putri, M. (2022). Evaluasi Risiko Kerja di Industri Baja dengan HIRARC. Jurnal Manajemen K3, 10(1), 12–21.
Farid, M., & Salsabila, N. (2023). Evaluasi Risiko Mesin pada Industri Makanan Beku. Jurnal Teknik Industri Pangan, 6(1), 34–41.
Firmansyah, H., & Avrianto, B. (2022). Implementasi HIRARC dan Kepatuhan SOP di Pabrik Plastik. Jurnal Keselamatan Dan Kesehatan Kerja, 11(3), 25–32.
M, Etemadi, Mohd., Mahdzi, N., Mohd, Noor, D. of O. S. and H. (DOSH). (2020). Guidelines for Hazard Identification, Risk Assessment and Risk Control (HIRARC). Ministry of Human Resources Malaysia.
Maulana, F., Sari, A., & Lestari, D. (2023). Penerapan HIRARC di Industri Tekstil. Jurnal Teknik Industri Dan Ergonomi, 7(2), 61–70.
Nugroho, R., & Iswanto, T. (2020). Risiko Pengelasan dan Pemotongan Logam pada Industri Otomotif. Jurnal Teknologi Industri, 8(4), 15–23.
Prasetyo, M., & Amanda, S. (2024). Evaluasi Risiko HIRARC pada Industri Furnitur. Jurnal Manajemen Industri, 9(1), 50–59.
Rahmawati, L., Setiadi, A., & Marlina, Y. (2022). Audit Sistem Manajemen Risiko di Industri Logam Ringan. Jurnal Sistem K3, 5(3), 78–87.
Rayani, C., & Sinulingga, I. (2025). Analisis penerapan manajemen risiko terhadap kecelakaan kerja di sektor manufaktur. 3(1), 258–263.
Setiawan, B., Putra, D., & Wulandari, S. (2023). Evaluasi Risiko Ergonomi Menggunakan HIRARC dan REBA di Industri Logam. Jurnal Kesehatan Kerja Dan Ergonomi, 6(2), 22–30.
Wahyuni, T., & Prabowo, H. (2020). HIRARC untuk Produksi Pupuk Organik: Studi Kasus di UMKM. Jurnal Industri Hijau, 4(1), 13–20.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 JOURNAL SAINS STUDENT RESEARCH
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
