Analisis Identifikasi Bahaya Kecelakaan Kerja Menggunakan Metode Job Safety Analysis (JSA) dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (HIRARC) di Departemen Stamping Studi Kasus: PT. Mitra Metal Perkasa

Authors

  • Tata Sulaeman Program Studi Teknik Industri, Fakultas Sains & Teknologi, Universitas Teknologi Yogyakarta
  • Ferida Yuamita Program Studi Teknik Industri, Fakultas Sains & Teknologi, Universitas Teknologi Yogyakarta

DOI:

https://doi.org/10.61722/jssr.v4i4.11678

Keywords:

Occupational Health and Safety (OHS), Job Safety Analysis (JSA), HIRARC, Workplace Accident Risk, Stamping Department

Abstract

Occupational Health and Safety (OHS) is an important aspect of the manufacturing industry to prevent workplace accidents and create a safe working environment. The Stamping Department of PT Mitra Metal Perkasa involves various work activities with potential hazards, such as material loading on coiler machines, stamping processes, welding activities, and material handling. Based on workplace accident data from 2023–2026, approximately 8 accident cases occurred, including hand injuries caused by machine entrapment, material rebounds, cuts from metal scraps, and ergonomic risks. Therefore, hazard identification and risk assessment are required to minimize the potential for workplace accidents.This study aims to identify potential hazards, assess occupational accident risks, and propose risk control measures in the Stamping Department of PT Mitra Metal Perkasa. The method used is Job Safety Analysis (JSA) with the Hazard Identification, Risk Assessment, and Risk Control (HIRARC) approach. Data were collected through observation, interviews, documentation, and company accident records. The expected results of this study are the identification of hazards in each work activity, determination of risk levels based on low, moderate, high, and extreme risk categories, and recommendations for risk control based on the hierarchy of hazard controls.

References

Azhar, A., & Wijaya, R. (2021). Analisis Risiko Pengelasan Industri Logam Menggunakan Metode HIRARC. Jurnal Keselamatan Kerja, 9(2), 45–53.

Azizah, R., Susanto, D., & Putri, M. (2022). Evaluasi Risiko Kerja di Industri Baja dengan HIRARC. Jurnal Manajemen K3, 10(1), 12–21.

Febriansyah, M. D. (2024). ANALISIS IDENTIFIKASI BAHAYA KECELAKAAN KERJA MENGGUNAKAN JOB SAFETY ANALUSIS (JSA) DENGAN PENDEKATAN HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL (HIRARC) DI PT PNM CABANG SOLO. Sports Culture, 15(1), 72–86. https://doi.org/10.25130/sc.24.1.6

Hidayat, M. C., Nuruddin, M., Studi, P., Industri, T., Teknik, F., Gresik, U. M., & Gkb, J. S. (2021). Analisis Identifikasi Bahaya Kecelakaan Kerja Menggunakan Job Safety ANALYSIS ( JSA ) DENGAN PENDEKATAN HAZARD IDENTIFICATION , RISK ASSESSMENT AND RISK CONTROL ( HIRAR. 2(4), 557–571.

Malaysia, D. of O. S. and H. (DOSH). (2020). Guidelines for Hazard Identification, Risk Assessment and Risk Control (HIRARC). Putrajaya: Ministry of Human Resources Malaysia.

Palengka, G. J., & Liperda, R. I. (2022). Analysis of Potential Risks and Work Accidents Using Hazard Identification , Risk Assessment and Risk Control ( HIRARC ) Method : a Warehouse Support Case Study of PT . Vale Indonesia Tbk. Jurnal Logistik Indonesia, 6(1), 60–67.

Rayani, C., & Sinulingga, I. (2025). Analisis penerapan manajemen risiko terhadap kecelakaan kerja di sektor manufaktur. 3(1), 258–263.

Roughton, J. E., & Crutchfield, N. (2008). Assessing Safety and Health Training Needs. Job Hazard Analysis, 2002, 233–266. https://doi.org/10.1016/b978-075068346-3.50012-6

Downloads

Published

2026-07-02

Issue

Vol. 4 No. 4 (2026): Agustus: Jurnal Sains Student Research

Section

Articles

License

Copyright (c) 2026 JOURNAL SAINS STUDENT RESEARCH

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.